How to Create your own Shard!

[Yukiko]

Yeah! threaten to send him a 12 pack of Coors.
*laughs*

[runtest]

For the newest release you do not need to insert this code any more.

Code: Select all

exported function GetHitsRegenRate(mobile) 
return 10000; 
endfunction 

exported function GetHitsMaximumValue(mobile) 
return 10000; 
endfunction 

It should fix that problem eeryone was having.

[hellfire]

I had a problem.....
in the ReamGen I pressed "E" than "B"

then it came this problem:

Initializing files: Done.
Execution aborted due to: readstaticblock: fread(sidxfile) failed.
Reading pol.cfg.
Reading uoconvert.cfg.
Unable to open configuration file realm/britannia/realm.cfg
Execution aborted due to: Unable to open configuration file realm britainnia/realm.cfg


Any sugestions?

[runtest]

I had the same problem. Just convert the T2A map first then the Mondain map will convert that means A then B. Then run the server al should be good.

[ftw-omfs]

Client connected from 127.0.0.1 (1 connections)
Undefined message type 84
Unexpected message type 84, 62 bytes (IP:127.0.0.1, Account:None)
0000: 84 54 61 3c 81 2f 2c ee d3 75 9b 6a 6b 6b e8 5d .Ta<./,. .u.jkk.]
0010: 9a bc bf 47 c5 90 ad 36 9a bc bf 47 c5 90 ad 57 ...G...6 ...G...W
0020: 8d c5 7f 54 e6 00 aa 86 3f a5 e8 6b 30 b4 e7 e9 ...T.... ?..k0...
0030: 9a bc bf 47 c5 90 ad 36 9a bc bf 47 c5 6f ...G...6 ...G.o..

Anyone know what i did wrong?

[Yukiko]

ftw, what client version are you trying to connect with? Did you UO Rice it first? Check ClientEncryptionVersion in pol.cfg and make sure it is set to none when using decrypted clients.

[utghost]

hi, im kind of new to all this, i have tried everything to get my shard to work but i cant login to it, i ran uorice to get the cilent and changed the login details so i should connect to my shard, my shard detects the in coming connection but i am unable to get any further than verifying account

help

[CWO]

Now you ran UORice, are you running the No_Crypt_Client2D.exe that UORice made? Or are you still running the client.exe? Not getting past verifying is usually the fact that you're not running the No_Crypt... Other than that, more info is needed...

What POL Core are you running? What client version are you running?

[utghost]

i ran no crypt made by uorice

i am running core 097
and cilent 5.0.9.1[/quote]

[Pierce]

What script base are you using?

Try searching a file named uoclient.cfg.
If there the option EnableControlFlowPackets is set to 1, set this option to zero or delete this line. Cause otherwise you can only connect with clients lower than 4.0.0e.

[major]

hi there, i did all in the guide for my shards its was working pretty, now i have format my cump... now i tryed to compile .src files and gave me this error :

warning: DBHELP.DLL too old, version 5.1+ required
EScript Compiler v1.08

can some one help me pls

[OldnGrey]

There is a link to download this file here:

http://releases.polserver.com/index.php ... re/Windows

[major]

Ok but i always got this when i try to compile .src scripts

EScript Compiler v1.08
Copyright <C> 1994-2007 Eric N. Swanson

compilation summary:
press any key to continue ...

it never compile always gave that :S

[oenone]

did you edit your ecompile.cfg? show it, maybe there's a mistake.

[major]

Code: Select all

ModuleDirectory    c:\My UO Shard\Kirins World\scripts\modules 
IncludeDirectory    c:\My UO Shard\Kirins World\scripts 
PolScriptRoot       c:\My UO Shard\Kirins World\scripts 
PackageRoot      c:\My UO Shard\Kirins World\pkg 
PackageRoot      c:\My UO Shard\Kirins World\devpkg 
GenerateListing      1 
GenerateDebugInfo   1 
GenerateDebugTextInfo   1 
DisplayWarnings 1 
CompileAspPages 1 
AutoCompileByDefault 1 
UpdateOnlyOnAutoCompile 1 
OnlyCompileUpdatedScripts 1 
DisplaySummary 1 
GenerateDependencyInfo 1 
DisplayUpToDateScripts 0 

[major]

im really not good -.- i found it it was just because the folder was not the same name - ops:

[major]

Hum, i was not able to connect qith the admin/admin until i go in the account file tu put enabled 5 (admin) but every time i close the clients it goes back to 1 what that makes me unable to connect til i go change it again

some times it connect but only once if i disconnect from server im unable to reconnect with the same account

Even if i change it in the account file and restard the shard cant connect

pls help me :s

It dont seem to check the account.txt (account:none)

i have 2 accounts and the 2 are unable to connect

[sombrabr]

Thanks for tutorial!

Well i try make my own server but don't work

i make everything like a tutorial say.

i put the 097_basicSetub and pol-core097 in the same past.

i configurated file ecompile.cfg and vitalInit.src

i compiled in "startHere.bat"

and copy the .mul files in past MUL

well, after i do all this, i go in "starthere.bat" and i chose comand "d" start POL.exe

When he load can't read and write the start.cfg, so i go to take a look in my scripts folder, and don have a start.cfg, so i try more 3 times make a server fron the start. but hapen the same thing, when i login in this server after POL.exe complete the loading, don't have nothing, just me and the map(don't have npc or mosters), the commands like .go don't work, and all my status the value is 1 (heal, mana, stamina etc...).
_

after i try all this, i try something diferent, i get the "097-official.zip" and unzip in the past where is my shard, so i do all again, and when i try to load POL.exe works (he loading mutch mor things), so i login in server, my status back to normal now everything is 100(because i login with admin), but again don't have nothing(npc or mosters), this is normal? or what i do wrong?

thanks for you attemption

and sorry my english - i'm braziliam, but i like UO more then soccer ^^

[dkpat]

it is normal. as of right now POL 097 distro doesn't have NPC or monster definitions... let alone spawns. it will in the future but right now it doesn't

[sombrabr]

well i'm noob ^^ how i put in game spawn of npc and mosters?

[Stephan]

eish, this is frustrating. Thx for the help so far. the multis.cfg does get created. The .mul files are present. I copied it from another distro that I have successfully compiled and ran successfully. Dont know what I am doing wrong.

[Strider]

New To Scripting

First night with POL and this is the prob i'm getting:


Assertion Failed: pAttrStrength, .\attribute.cpp, line 94
Forcing stack backtrace.
Unhandled Exception! Minidump started...
#####################################
Unhandled Exception! Writing Minidump file.
This File with explanation and last lines from log files should be given to the
development team.
Saved dump file to 'POL097-2007-08-23 RC5 Corengina-20071204215015-0.dmp'
Last Script: PC: #####################################
Server Shutdown: load_attributes_cfg
execution aborted due to: Assertion Failed: pAtterStrength, .\attribute.cpp, line 94

================
POL has Finished running
================

Press any key to continue . . .





I reloaded it and now i get

Exception caught while loading script pkg/systems/attributes/hooks/vitalInit.ecl
: Unable to open script pkg/systems/attributes/hooks/vitalInit.ecl for reading.
Unable to read script pkg/systems/attributes/hooks/vitalInit.ecl
Error reading script pkg/systems/attributes/hooks/vitalInit.ecl
Error reading configuration file pkg/systems/attributes
Export Script pkg/systems/attributes/hook/vitalInit.ecl not found
Element: Vital Hits, found on line 28
Server Shutdown: load_vitals_cfg: load_packed_cfgs
Execution aborted due to: Configuration file error


================
POL has Finished running
================

Press any key to continue . . .

[Strider]

I'm getting my first error again

[CWO]

First of all, lets go through the basics of preventing crashes.

Redownload the POL097 core. Extract every file in the zip to replace the files that already exist. Then, I usually get this done with a quick Windows file search, find every .ecl file throughout the scripts and delete them. After that, run ecompile.exe through the command prompt to recompile the entire shard.

[c h a o s]

just curious if this works with KR too