World of Dreams for Pol 097 Ready For Download!

Scripts for an entire shard, alternatives to the distro made by other users

Moderator: POL Developer

Post Reply
JaceAce
Expert Poster
Posts: 74
Joined: Fri Feb 29, 2008 10:56 pm

World of Dreams for Pol 097 Ready For Download!

Post by JaceAce » Thu Apr 16, 2009 11:54 am

Ok, I completed the initial conversion of the World of Dreams script set.

May World of Dreams Live again!

Thanks to all who have contributed to the Pol Server and World of Dreams scripts!
(I converted to 097 because that was the supported server when I started, later i will convert again
to 098)

Here ya go! Let me know if all goes well. Install instructions will be within the script set zip and
i will also post them here too!

Happy Gaming !
:grouphug:
Attachments
wod97scripts.zip
World of Dreams Script Set for Pol 097
(1.95 MiB) Downloaded 2534 times

JaceAce
Expert Poster
Posts: 74
Joined: Fri Feb 29, 2008 10:56 pm

Instructions For Installing the World of Dreams Script Set

Post by JaceAce » Thu Apr 16, 2009 11:56 am

Converted by JaceAce at jaceace01@sbcglobal.net

Instructions for installing Pol 097 with the World of Dreams Scripts
Note: The World of Dreams Scripts have been converted but you will need to "tweak" them to completely work as desired.
Note: These directions use the client -> Mondain's Legacy.

Note Sections within the &&&&&&&&&&&&&&&&&&&& are for Windows Users only
Note Sections within the ******************** is for Linux Users only
Note Sections within the %%%%%%%%%%%%%%%%%%%% are for all users

Steps:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1. Go to Pol main website at http://www.polserver.com
2. Click on the tab downloads
3. Click on the link -> advanced downloads page
4. Click on the link -> Distro -> 097
5. Download the file -> 097-BasicSetup.zip

5a. Note: If you are a Linux user, Do not close this download page. You will need it.

6. Extract the files into a directory of your choosing
7. Create a directory for your Pol World of Dreams Server
8. Copy the contents of the extracted files into you Pol World of Dreams Server Directory
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
**********************************************************************************************
Linux Users Only
8a. From the Pol advanced downloads page,
8b. Click on the link -> Linux -> 097
8c. Download the file -> pol-linuxbin-097.4-2009-03-23-Coregina-gentoo.tar.gz
8d. Extract the files into a directory of your choosing
8e. Copy the contents of the extracted files into your Pol World of Dreams Server Directory
8f. Note: make sure to overwrite all files
8g. From the Pol advanced downloads page.
8h. Click on the link -> Distro -> 097
8i. Download the file -> 097-Distro.zip
8j. Extract the files into a directory of your choosing
8k. Look for the file -> StartHere.sh
8l. Copy the file ->StartHere.sh<- into your Pol World of Dreams Server Directory

Note: If you do not want to save these files then do this:
8m. Delete the file -> 097-Distro.zip
8n. Delete the file -> pol-linuxbin-097.4-2009-03-23-Coregina-gentoo.tar.gz
End Note

Note: I would suggest doing this so you dont get confused.
8o. Delete the directory that you made for the extracted files in both the directories of:
097-Distro.zip
pol-linuxbin-097.4-2009-03-23-Coregina-gentoo.tar.gz
End Note

End of Linux User Section
*********************************************************************************************
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

For Windows Users Only
8a. From the Pol advanced downloads page
8b. Click on the link -> Distro -> 097
8c. Download the file -> Distro097-Full-Windows.zip
8d. Extract the files into a directory of your choosing
8e. Copy these files from your temp Full Distro Directory to your main Pol World of Dreams Directory
Pol.exe
uoconvert.exe
uoconvert.cfg
8f. Copy these files from your temp Full Distro Directory to your "scripts" main Pol World of Dreams
Directory

runecl.exe
ecompile.exe
ecompile.cfg

Note: If you do not want to save this file then delete it
8g. Delete -> Distro097-Full-Windows.zip

Note: I would suggest doing this so you dont get confused
8h. Delete the temp directory for your files of Full Distro
End Note

End of Windows User Section
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Note: If you do not want to save these files then do this:
9. Delete the file -> 097-BasicSetup.zip
End Note

Note: I would suggest doing this so you dont get confused.
10. Delete the directory that you made for the extracted files of
097-BasicSetup.zip
End Note

11. If you followed along perfectly. You should have 1 Directory for your Pol Server with
all the basic Pol files.

12. Create a new folder in your Pol World of Dreams directory called -> MUL
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
****************************************************************************************************
Linux Users Only
12a. Change the permissions setting on the file ->StartHere.sh<- so you can execute the file
12b. Also, I would delete all ".bat" files so you dont get confused with them and any windows
".exe" files.

12c. Enter the "scripts" directory within your Pol World of Dreams Server Directory
12d. Copy the file -> ecompile.cfg.example
12e. Paste the file in the same directory giving it a new name of -> ecompile.cfg
12f. Edit the file -> ecompile.cfg
12g. Make sure to update the directory information so that it is correct
12h. Save your ecompile.cfg file
End Linux Section
****************************************************************************************************
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Windows Users Only
12a. Enter the "scripts" directory within your Pol World of Dreams Server Directory
12b. Edit the file -> ecompile.cfg
12c. Make sure to update the directory information so that it is correct
12d. Save your ecompile.cfg file
End Windows Section
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
13 Copy the ultima client files into your Pol World of Dreams Server directory -> MUL
map0.mul
multi.idx
multi.mul
staidx0.mul
statics0.mul
tiledata.mul

Note:
14. If you want the other map areas copy these files to your Pol World of Dreams Server Directory -> MUL
map2.mul, map3.mul, map4.mul
staidx2.mul, staidx3.mul, staidx4.mul
statics2.mul, statics3.mul, statics4.mul
End Note

15. For Windows run -> StartHere.bat
For Linux run -> StartHere.Sh
*********************************************************************************************************

For Linux Users Only
16a. Choose Menu Option -> A
16b. Choose Menu Option -> B wait til it completes
16c. If you used all the mul's ie map0, map2, map3, map4 etc. choose -> F Build all realms wait til completes.
16d. If you used only the map 0 mul's choose -> G Build Britainia realm and once complete, H Build Britainia Alt realm.
16e. Select the client you are using for these instructions select -> Mondain's Legacy

16f. Wait til all the muls have been built. This can take a little while.
*********************************************************************************************************
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

For Windows Users Only
16a. Choose Menu Option -> a
16b. Choose Menu Option -> d wait til it completes
16c. If you used all the mul's ie map0, map2, map3, map4 etc choose -> J Build all realms
16d If you used only map 0 mul's choose -> e Build Britainia realm and once complete, f Build Britainia Alt realm
16e. Select the client you are using for these instructions select -> Mondain's Legacy

16f. Wait til all the muls have been built. This can take a little while.
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
After this step your muls should be all ready to go!
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

Now lets install the converted World of Dreams Pol 097 Script Set!!!!
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

17. Download -> wod97scripts.zip
18. Extract the files in a temporary directory of your choosing
19. In the temporary directory move through the directory structure until you can select the following
directories:

config
data
docs
log
pkg
regions
scripts

20. Select these directories and copy/paste these directories to your main Pol 097 World of Dreams directory

Important: Make sure to overwrite all files!

21. Now the fun part!
22. Enter into the "scripts" directory of your main Pol World of Dreams server.
23. run ecompile
24. Note: If it does not compile all the scripts double check your ecompile.cfg -the directory structure
must be correct for it to work-

25. If all went correct, you should have all your scripts built! Yea!
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

26. Enter into the "config" directory in the main Pol World of Dreams server directory
27. edit "servers.cfg"
28. add your server information
29. Save the file

30. Run Pol!

31. Now your set! Time to tweak it to whatever settings u desire! Have fun!

Happy Gaming!
JaceAce

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

JaceAce
Expert Poster
Posts: 74
Joined: Fri Feb 29, 2008 10:56 pm

Zulu Hotel

Post by JaceAce » Thu Apr 16, 2009 12:02 pm

I will be converting Zulu Hotel scripts just like I did for World of Dreams coming soon!

:P

flamewing
Neophyte Poster
Posts: 31
Joined: Thu Dec 04, 2008 6:10 am

Re: World of Dreams for Pol 097 Ready For Download!

Post by flamewing » Fri Apr 17, 2009 2:25 pm

Wonderfull!

JaceAce
Expert Poster
Posts: 74
Joined: Fri Feb 29, 2008 10:56 pm

Re: World of Dreams for Pol 097 Ready For Download!

Post by JaceAce » Sun Apr 19, 2009 10:14 am

Just a head's up. I started working on those ZhFa files yesterday. Also, ill be converting this version of Wod to 098 also after i get the ZHfA going with 097
Just an update :)

JaceAce
Expert Poster
Posts: 74
Joined: Fri Feb 29, 2008 10:56 pm

Re: World of Dreams for Pol 097 Ready For Download!

Post by JaceAce » Mon Apr 20, 2009 6:35 pm

If anyone tried installing this. Let me know how it went, if it worked etc :)

roghz
New User
Posts: 1
Joined: Wed May 27, 2009 3:29 am

Re: World of Dreams for Pol 097 Ready For Download!

Post by roghz » Wed May 27, 2009 11:08 pm

Didnt test it for 100%, but im found i think 2 fucked up things.

1. like dev cant use gm commands etc.
2. Can't create NPC - when trying do that - why? :(

JaceAce
Expert Poster
Posts: 74
Joined: Fri Feb 29, 2008 10:56 pm

Re: World of Dreams for Pol 097 Ready For Download!

Post by JaceAce » Thu May 28, 2009 6:28 am

Also, Im not supporting the 97 version any more its there for people to mess with. You should use the 98 version. I plan to only keep the most current version. That way, later on we dont have to do large conversion jumps like we did from 95 to 98 etc. I am also preparing the next downloadable 98 version.

User avatar
Damien White
Journeyman Poster
Posts: 68
Joined: Tue Aug 18, 2009 6:34 pm
Location: Canada

Re: World of Dreams for Pol 097 Ready For Download!

Post by Damien White » Wed Aug 19, 2009 9:43 pm

Would you happen to have a data set for the World of Dreams script set?
Yesterday is history,
tomorrow is a mystery,
today is a gift ... that is why it is called ... present.

Post Reply