Problem:stop on checkpoint: read_multidefs + General Help

Here you can post threads requesting help on the official POL Ultima Online Emulator Core 098.

Moderator: POL Developer

Post Reply
ZrnecX
New User
Posts: 4
Joined: Sun Feb 07, 2010 12:10 pm

Problem:stop on checkpoint: read_multidefs + General Help

Post by ZrnecX » Sun Feb 07, 2010 12:40 pm

Hi, I have a problem with POL (with what else is it?: D) Well just here to install the pole according to some instructions here what I found. But I console output:

Code: Select all

POL098.2-2009-10-13 Beer and Waffles (VS.NET 2005)
compiled on Oct  13 2009 21:04:50
Copyright (C) 1993-2009 Eric N. Swanson

Reading Configuration.
checkpoint: reading servspecopt.cfg
checkpoint: low-fragmentation Heap ...disabled via ServS
checkpoint: init default itemdesc defaults
checkpoint: loading POL map file
Loading Realm britannia.
Validating statics files: Completed in 15 ms.
Loading Realm britannia_alt.
Validating statics files: Completed in 15 ms.
Loading Realm ilshenar.
Validating statics files: Completed in 0 ms.
Loading Realm malas.
Validating statics files: Completed in 0 ms.
Loading Realm tokuno.
Validating statics files: Completed in 0 ms.
checkpoint: initializing IPC structures
checkpoint: initializing sockets library
hostname is zrnecx
address: 192.168.1.103
LAN IP address is 192.168.1.103
address: 5.90.203.55
Internet IP address is 5.90.203.55
checkpoint: loading configuration
checkpoint: load_cmdlevels
checkpoint: read_combat_config
Loading combat.cfg options
checkpoint: read_boat_cfg
checkpoint: read_multidefs
nothing more
I do not know if that pol going or what is the error or how to connect the client or what is ip. Advise anyone? Thanks a lot.

Translated by Google ... ;) ;) ;)

Tomi
POL Developer
Posts: 475
Joined: Tue Feb 21, 2006 5:08 pm

Re: Problem:stop on checkpoint: read_multidefs + General Help

Post by Tomi » Sun Feb 07, 2010 12:49 pm

looks like you forgot to use uoconvert to generate the config files ( multis.cfg tiles.cfg and landtiles.cfg )

ZrnecX
New User
Posts: 4
Joined: Sun Feb 07, 2010 12:10 pm

Re: Problem:stop on checkpoint: read_multidefs + General Help

Post by ZrnecX » Sun Feb 07, 2010 1:40 pm

uoconvert I used the 2x .. (uoconvert.exe folder where i pol.exe ...) I did the same even 097th. know what to do about it ..But when I used the search, so I did not find the file .

Post Reply