connection lan for server pol 95

Here you can post threads requesting help on the official POL Ultima Online Emulator Core 096.
Note: Core 096 is no longer officially supported.
Post Reply
th3_l00ny
New User
Posts: 28
Joined: Sun Mar 12, 2006 1:32 pm

connection lan for server pol 95

Post by th3_l00ny »

I need to know what files i need to change if i want to play in lan whit my other pc....
FreeSoul
Master Poster
Posts: 90
Joined: Sat Feb 04, 2006 9:14 am

Post by FreeSoul »

pol.cfg
config/servers.cfg

that is base...
nevalon
Neophyte Poster
Posts: 39
Joined: Tue Mar 07, 2006 7:28 am

Post by nevalon »

I wrote that in another place, but nobody answered.

I've got a problem with LAN-connection (096). Some facts:

1. No problem with local connection (127.0.0.1 and global IP)
2. LAN connection: after typing acct and pass, before shard-choosing-window, hanging on "Verifying account"
3. From POL:
Client connected from IP: xxx (1 connections)
(long, long time)
Client disconnected from IP: xxx (0 connections)

Any idea what's wrong? The same problem on LAN-IP and Global-IP...
There was everything ok with LAN-connection a few time ago (about month), but I haven't controlled it for a couple of time (it wasn't necessary) but when I finally checked it... Problems. I made much, much changes in scripts (some hooking scripts also) and I've got no idea why suddenly I can't connect from another machine...
th3_l00ny
New User
Posts: 28
Joined: Sun Mar 12, 2006 1:32 pm

could attach

Post by th3_l00ny »

Hey what i have to do when i log and that whrit this.... :The client could not attach to the game server. if must have been taken down please wait ...... hummm my server is on and all it ok.... and i cannot log whit my other pc
Matrix
Neophyte Poster
Posts: 32
Joined: Fri Feb 03, 2006 9:13 am

Post by Matrix »

Do you use a firewall?
th3_l00ny
New User
Posts: 28
Joined: Sun Mar 12, 2006 1:32 pm

Post by th3_l00ny »

yes but my firewall is off when I work on my shard
th3_l00ny
New User
Posts: 28
Joined: Sun Mar 12, 2006 1:32 pm

fils server.cfg

Post by th3_l00ny »

in the files server.cfg what i need to whrit at the place of ****

GameServer
{
Name POL local
IP *****
Port ****
}
GameServer
{
Name POL
IP ******
Port ****
}
GameServer
{
Name POL-ip
IP *******
Port ****
}
Matrix
Neophyte Poster
Posts: 32
Joined: Fri Feb 03, 2006 9:13 am

Post by Matrix »

GameServer
{
Name myshardname
IP *ur ip*
Port *ur port*
}


and your login.cfg?
Did you allow windows to accept ip from outside? (your network connections)
XtehseA
New User
Posts: 22
Joined: Thu Feb 23, 2006 8:33 pm

Post by XtehseA »

make sure that your router is setup for pol. you must open and forward the ports that you set pol95 up for. if you need help with networking feel free to msn me at dark_rival73@msn.com and i will help u do it if you have problems.
nevalon
Neophyte Poster
Posts: 39
Joined: Tue Mar 07, 2006 7:28 am

Post by nevalon »

any idea with my problem? I don't use firewall... Look some posts before.
XtehseA
New User
Posts: 22
Joined: Thu Feb 23, 2006 8:33 pm

Post by XtehseA »

router isnt configured for pol. i suggest getting ur router booklet out if you have one and read how to open and forward ports.[/u]
th3_l00ny
New User
Posts: 28
Joined: Sun Mar 12, 2006 1:32 pm

Post by th3_l00ny »

heu.... how i can open the port of my rooter %?
DevGIB
Grandmaster Poster
Posts: 248
Joined: Mon Feb 06, 2006 6:12 am

Post by DevGIB »

using the server.cfg you will need to have 2 seperate entries for the internet and lan, i presume that you think because you can connect to 127.0.0.1 or what ever computer on the lan your using it on that you should be able to get into the game what happens is connecting on that ip (game side) will alow you to get to the connections part of the server then you will need to make sure that you can connect threw the servers router on that ip so if you are using 127.0.0.1 in your login.cfg in your pol dir you need to make sure that the same thing is in your servers.cfg in your config dir of pol.
Post Reply