SA client bugs

[atreiu]

Dear Turley&devs, i will develop my server with SA client. please fix next if(it_possible), cause this is critical stuff =((

1. spellbook. full spellbook with spells looks emtpy on SA cl. on old clients all ok.


2. bank&containers. all items can be stored only in upper left cell like


if this prblms have decision please say

thanks in advance

[Justae]

Hello Atreiu,

Try this in place of your servspecopt.cfg :

Code: Select all

DefaultDoubleclickRange=2
MovementUsesStamina=1
AllowSecureTradingInWarMode=0
TotalStatsAtCreation=65,90
DefaultDecayTime=12
DefaultContainerMaxItems=250
DefaultContainerMaxWeight=60000
MaxContainerSlots=250
MaxSlots=255
UseContainerSlots=1
UOFeatureEnable=0x1e8
HiddenTurnsCount=1
MaxPathFindRange=50
ItemColorMask=0x4FFF
DefaultLightLevel=8
InvulTag=1
CharacterSlots=6
SendStatLocks=1
SupportFaces=2

The two conditions you show are mostly related to settings in the file above.
There is of course supporting code for Spellbooks.
Your accounts.txt file must have this entry for each account : UOExpansion SA
That can be set from your login.src
Again, refer to changelog.txt
It might help you if you downloaded the official POL097 game server scripts and use those as an example.

Regards,
Justae

[atreiu]

Hello dear Justae =)
thanks - 1&&2 fixed.
please answer on my PM.

4. strange. after first magic usage by macros on mobile target, appear opponent's status bar

after that i cant use magic by macros (no press hotkeys, no press direct in macros bar). i can use magic only from spellbook directly.
after each pressing by hotkeys or direct in macros bar i see this in servser_console:
"Unknown packet type 0xbf: 11 bytes (IP:127.0.0.1, Account:admin)
0000: bf 00 0b 00 2d 00 12 00 00 01 1a ....-... ........"
maybe reason in this? Turley please look at this
Packet Name: General Information Packet

3. someone know how to implement Cyrillic font in SA clent?
i had unpack .uop and found fonts files .ttf there exist Cyrillic letters (АБВГДЕ etc)
but in client words on Cyrillic looks like this font dont supported.
BUT
with this client on another server (Abyss) all ok. - reason in my server side?

[atreiu]

2. dont solved. after server reboot all items in containers in upper left cell.

[Turley]

after each pressing by hotkeys or direct in macros bar i see this in servser_console:
"Unknown packet type 0xbf: 11 bytes (IP:127.0.0.1, Account:admin)
0000: bf 00 0b 00 2d 00 12 00 00 01 1a ....-... ........"
maybe reason in this? Turley please look at this
Packet Name: General Information

You should read a bit more then just the name in the packet docs

Subcommand 0x2D: Cast targeted spell (client side packet)

Byte[2] Spell ID

Byte[4] Target Serial

[atreiu]

ok Turley)
and what is possible to do with that? )
i am not a GM of packethooking : (
should i hook packet and make exported func?

[atreiu]

Turley answer please ^^^

5. cant create character by SA client. server said:
Client connected from 127.0.0.1 (1 connections)
Create Character: Starting skill values incorrect
Client disconnected from 127.0.0.1 (0 connections)

by older client all ok.

suppose this cause in SA you set 4 skill by 30%. in sum 120. in older client 2 by 50.
cant find proper theme in config files

[Indy]

@ 4. Packet 00 BF ... 00 2D ...

This packet doesn't seem to be implented. (Check the Developers Documentation!)

So yes, you'll have to write your own packet hook.

Regards, Indy

[Turley]

suppose this cause in SA you set 4 skill by 30%. in sum 120. in older client 2 by 50.
cant find proper theme in config files

Check
http://docs.polserver.com/pol099/config ... pecopt.cfg
TotalStatsAtCreation

[atreiu]

suppose this cause in SA you set 4 skill by 30%. in sum 120. in older client 2 by 50.
cant find proper theme in config files

Check
http://docs.polserver.com/pol099/config ... pecopt.cfg
TotalStatsAtCreation

i had checked it before...but nothing many combinations was
TotalStatsAtCreation=65,90
TotalStatsAtCreation=65,80,90-95,100-110
TotalStatsAtCreation=1-500
TotalStatsAtCreation=1-1000000
are you shure what stats and skills are the same?

[Justae]

Check your housing package > itemdesc.cfg

as a sample entry, does it have these values ?
House 0x6066
{
Name smallstonehouse
Graphic 0x4066
MultiID 0x66
OldObjtype 0x4066
}

If it does, then that is why your client crashes when entering an area with a Multi in it.

The realm regen (uoconvert) changes the multis and boat txt files in pol\config with new values from the new client muls. House graphics change from 0x40xx to 0x80xx. For example, to correct the entry above, it would look like this :

House 0x6066
{
Name smallstonehouse
Graphic 0x8066
MultiID 0x66
OldObjtype 0x8066
}

Same thing with boats, old boats :

Boat 0x6040
{
Name smallboat
Graphic 0x4000
MultiID 0x0000
OldObjtype 0x4000
OldObjtype 0x4001
OldObjtype 0x4002
OldObjtype 0x4003
}

Change to new :

Boat 0x6040
{
Name smallboat
Graphic 0x8000
MultiID 0x0000
OldObjtype 0x8000
OldObjtype 0x8001
OldObjtype 0x8002
OldObjtype 0x8003
}

Also make sure in pol.cfg MaxTileID=0x7FFF You must run uoconvert with this set if you want the realms to generate properly.

I hope that helps you a bit.


Cheers,
Justae.

[atreiu]

Justae thank you a lot : )
but i delete my post before you post. i found a reason

Turley answer please regard #5. Create Character: Starting skill values incorrect

this is last problem that i dont fix

[Turley]

Ups Mmh skills I think I fixed something in the corevsvn a while ago, grab the Svn build it and try.

[atreiu]

suppose - server waiting Packet: 0x00, but my client send Packet: 0x8D
i dont understand what i must to do
please help with this =(

[Turley]

No problem with that pol99 handles it, but I think there was a bug with the skills which I fixed. So as I already said grab the latest build it and try.

[atreiu]

No problem with that pol99 handles it, but I think there was a bug with the skills which I fixed. So as I already said grab the latest build it and try.

actually i am using last ver of 099 from site. had download it again but result is same
you cant repeat it?

[Tomi]

Turley is telling you to get the Pol source ( Latest SVN ) and make the Pol build yourself, not getting the latest beta build.
Because in the latest beta build there is still not support for 0x8D packet iirc

[atreiu]

Turley is telling you to get the Pol source ( Latest SVN ) and make the Pol build yourself, not getting the latest beta build.
Because in the latest beta build there is still not support for 0x8D packet iirc

http://polserver.svn.sourceforge.net/vi ... /pol-core/ correct?
few years have not used tortoisesvn. he said:

Command: Checkout from http://polserver.svn.sourceforge.net/vi ... k/pol-core, revision HEAD, Fully recursive, Externals included
Error: OPTIONS of
Error: 'http://polserver.svn.sourceforge.net/vi ... k/pol-core': could
Error: not connect to server (http://polserver.svn.sourceforge.net)
Finished!:

[atreiu]

Error: MKACTIVITY of
Error: '/svnroot/polserver/!svn/act/367810bb-cb69-4349-bf95-76fa896f3f1c':
Error: authorization failed: Could not authenticate to server: rejected Basic
Error: challenge (https://polserver.svn.sourceforge.net)