It is currently Fri Nov 21, 2008 9:48 pm

View unanswered posts | View active topics


Board index » Older Core Versions » General Help (096)

All times are UTC - 8 hours




Post new topic Reply to topic  Page 1 of 1
  [ 25 posts ] 
  Print view Previous topic | Next topic 
Author Message
Firedancer
 Post subject:
PostPosted: Sat May 27, 2006 7:27 am 
Offline

Joined: Fri Feb 03, 2006 6:32 am
Posts: 104
Location: Austria
*laughs* now it's getting strange....

with the new uoconvert, I get this output:

Quote:
D:\Matrix\POL096>move multis.cfg config

D:\Matrix\POL096>uoconvert tiles
Reading pol.cfg.
Reading uoconvert.cfg.
Warning: Tile 0x1 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x2 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x3 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x4 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x5 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x6 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x7 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x8 uses Roof- and Platform-Flag at same time.
<...snip...>

the list goes on to 0x3fff, listing each and every item!

Also when trying to convert the mapfile I get this one repetively:

Quote:
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
<...snip...>


runs forever it does..... ocationally it reports other id's as well, but mostly 0x0. (I've aborted it now, after running for 9 hours....)


Ps: if I disable warnings, the file seem to convert just fine now.... some further issues prevent my pol from starting so far though - I'll will fix them now to see if the conversion worked fine (might take a while though, depending how many more errors pop up).

_________________
[url=www.etheria.org]
Etheria - Roleplaying Realism
Image [/url]

Top
 Profile  
 
Shinigami
 Post subject:
PostPosted: Sat May 27, 2006 8:44 am 
Offline
POL Core Developer

Joined: Mon Jan 30, 2006 9:28 am
Posts: 292
Location: Germany, Bavaria
Firedancer wrote:
the list goes on to 0x3fff, listing each and every item!

can u give me your tiledata.mul to check it? strange...

Firedancer wrote:
ocationally it reports other id's as well, but mostly 0x0. (I've aborted it now, after running for 9 hours....)

it is normal that it will print problematic tiles more than one time - because of tons of checks (don't ask me why... *fg*)

Firedancer wrote:
Ps: if I disable warnings, the file seem to convert just fine now....

that's good

Firedancer wrote:
some further issues prevent my pol from starting so far though - I'll will fix them now to see if the conversion worked fine (might take a while though, depending how many more errors pop up).

please, let me know...

Shinigami
Top
 Profile  
 
Firedancer
 Post subject:
PostPosted: Sat May 27, 2006 3:19 pm 
Offline

Joined: Fri Feb 03, 2006 6:32 am
Posts: 104
Location: Austria
Shinigami wrote:
Firedancer wrote:
the list goes on to 0x3fff, listing each and every item!

can u give me your tiledata.mul to check it? strange...

you can find my tiledata.mul file here:
http://www.etheria.org/filemanager/fileview/212/


Quote:
Firedancer wrote:
some further issues prevent my pol from starting so far though - I'll will fix them now to see if the conversion worked fine (might take a while though, depending how many more errors pop up).

please, let me know...

Shinigami


will do.... won't manage this weekend anymore sadly, but I'm positive sometime early next week!

_________________
[url=www.etheria.org]
Etheria - Roleplaying Realism
Image [/url]

Top
 Profile  
 
Pierce
 Post subject:
PostPosted: Sat May 27, 2006 3:33 pm 
Offline
Packet Maintainer

Joined: Thu Feb 02, 2006 8:33 am
Posts: 319
Two Questions:

1. Is there a linux version for the new uoconvert? Or is that one inside the newest linux core version the same as in that uoconvert.zip?
Perhaps a silly question, but i think .exe won't work under linux.
I am no linux expert :D

2. Does the member player.clientinfo now works on linux cores too?

And not to forget, great job. Thx to all of the Dev Team spending their free time for us. I tested the newest windows core for now and it works fine for me. I think this or next version could really be a good release candidate.
Top
 Profile  
 
Aeros
 Post subject:
PostPosted: Sat May 27, 2006 7:25 pm 
Offline

Joined: Mon Apr 24, 2006 10:56 am
Posts: 69
Exact same thing here - I also get those warnings, and when I disable warnings, it runs fine. Using a standard tiledata built from a standard ML copy.

Eventho the warnings don't show anymore with warnings disabled - will it still work?


Firedancer wrote:
*laughs* now it's getting strange....

with the new uoconvert, I get this output:

Quote:
D:\Matrix\POL096>move multis.cfg config

D:\Matrix\POL096>uoconvert tiles
Reading pol.cfg.
Reading uoconvert.cfg.
Warning: Tile 0x1 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x2 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x3 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x4 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x5 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x6 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x7 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x8 uses Roof- and Platform-Flag at same time.
<...snip...>

the list goes on to 0x3fff, listing each and every item!

Also when trying to convert the mapfile I get this one repetively:

Quote:
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
Warning: Tile 0x0 uses Roof- and Platform-Flag at same time.
<...snip...>


runs forever it does..... ocationally it reports other id's as well, but mostly 0x0. (I've aborted it now, after running for 9 hours....)


Ps: if I disable warnings, the file seem to convert just fine now.... some further issues prevent my pol from starting so far though - I'll will fix them now to see if the conversion worked fine (might take a while though, depending how many more errors pop up).

_________________
Head-Admin Aeros
Legends of Chyrellos UO Shard
http://www.chyrellos.co.za

Top
 Profile  
 
Shinigami
 Post subject:
PostPosted: Sun May 28, 2006 1:27 am 
Offline
POL Core Developer

Joined: Mon Jan 30, 2006 9:28 am
Posts: 292
Location: Germany, Bavaria
Aeros wrote:
Eventho the warnings don't show anymore with warnings disabled - will it still work?

the warning is just a warning. if u've enabled it, u'll get the same output files than disabled... - but in your cases your cpu has more to do with printing warnings than everything else - thats all

Shinigami
Top
 Profile  
 
Shinigami
 Post subject:
PostPosted: Sun May 28, 2006 1:31 am 
Offline
POL Core Developer

Joined: Mon Jan 30, 2006 9:28 am
Posts: 292
Location: Germany, Bavaria
Pierce wrote:
1. Is there a linux version for the new uoconvert?

not yet - I'm to lazy. it will be inside pol096final - or if some peoples ask for... maybe...

Pierce wrote:
Perhaps a silly question, but i think .exe won't work under linux.
I am no linux expert :D

maybe using wine... never tested

Pierce wrote:
2. Does the member player.clientinfo now works on linux cores too?


Shinigami
Top
 Profile  
 
Shinigami
 Post subject:
PostPosted: Tue May 30, 2006 11:10 am 
Offline
POL Core Developer

Joined: Mon Jan 30, 2006 9:28 am
Posts: 292
Location: Germany, Bavaria
Firedancer wrote:
runs forever it does..... ocationally it reports other id's as well, but mostly 0x0. (I've aborted it now, after running for 9 hours....)

ok, I've found a smaller (very very small) bug inside the code... it has shown each tile... oups... it's fixed now

Shinigami
Top
 Profile  
 
Tomi
 Post subject:
PostPosted: Thu Jun 08, 2006 3:14 pm 
Offline

Joined: Tue Feb 21, 2006 5:08 pm
Posts: 38
About 097

- Speedhack prevention
- Movemode A (air) for npc
- Support for OSI encrypted clients (some servspecopt setting as: only encrpyted, only without encryption, both)
- Packethook scripts to unloadable
- Custom housing
- Support for compressed gump packet
Top
 Profile  
 
Shinigami
 Post subject:
PostPosted: Thu Oct 19, 2006 11:12 am 
Offline
POL Core Developer

Joined: Mon Jan 30, 2006 9:28 am
Posts: 292
Location: Germany, Bavaria
OldnGrey wrote:
Various parts of the world have different linux versions as their favourite.
Looking at reasonably priced hosting solutions suitable for UK or USA hosting seem to favor FREEBSD a lot but maybe that's just where I looked. In fact it seems to be a lot easier to get an inexpensive commercial host on FREEBSD these days than WIN32 !


feel free to use it: http://releases.polserver.com/freebsd/

was build on a FreeBSD 6.1... so don't ask me, if it will work on different releases or other BSD too - just test it and report.

Shinigami
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 25 posts ] 

Board index » Older Core Versions » General Help (096)

All times are UTC - 8 hours


Who is online

Users browsing this forum: Yahoo [Bot] and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subice by phpBBservice.nl