96 startup error

[Devloper BCL]

hi,

i had latest version of pol95 and then replaced files with from the
pol-core-096-2005-12-08.. then i had run the uoconvert.exe.. after
this i got these files in the realm/britannia folder..

Verzeichnis von d:\serveur\pol\096\realm\britannia

02.01.2006 22:52 <DIR> .
02.01.2006 22:52 <DIR> ..
03.01.2006 05:13 50.331.648 base.dat
03.01.2006 05:13 75.497.472 maptile.dat
03.01.2006 05:13 155 realm.cfg
03.01.2006 05:13 13.646.559 solids.dat
03.01.2006 05:13 393.216 solidx1.dat
03.01.2006 05:13 20.411.416 solidx2.dat
6 Datei(en) 160.280.466 Bytes

when i have started pol.exe i got this error:

[i][b]Reading Configuration.
Loading Realm britannia.
Server Shutdown: loading POL map file
Execution aborted due to: BinaryFile::Open
('realm/britannia/statidx.dat, 0x8) failed.

but the statidx.dat isn't in that folder and it won't create after
converting over converting (did more than 10 times and nothing)..

and this is the uo convert.cfg:

LOSOptions
{
UseNoShoot 0
LOSThroughWindows 0
}

StaticOptions
{
MaxStaticsPerBlock 1000
WarningStaticsPerBlock 1000
ShowIllegalGraphicWarning 1
}

MultiTypes
{
Boats 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC
0xD 0xE 0xF 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17

Houses 0x64 0x65 0x66 0x67 0x68 0x69 0x6a 0x6b 0x6c 0x6d
0x6e 0x6f 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7a
0x7b 0x7c 0x7d 0x7e 0x7f 0x87 0x8c 0x8d 0x96 0x98 0x9a 0x9c 0x9e
0xa0 0xa2 0x1f4 0x1f5 0x1f6 0x3e8 0x3e9 0x3ea 0x3eb 0x7d0 0x7d1
0x7d2 0x7d3 0x7d4 0x7d5 0x7d6 0x7d7 0xbb8 0xfa0 0xfa1 0xfa2 0xfa3
0xfa4 0xfa5 0xfa6 0xfa7 0xfa8 0xfa9 0xfaa 0xfab 0xfac 0x1388 0x13ec
0x13ed 0x13ee 0x13ef 0x13f0 0x13f1 0x13f8 0x13f9 0x13fa 0x13fb
0x13fc 0x13fd 0x13fe 0x1404 0x1405 0x1406 0x1407 0x1408 0x1409
0x140a 0x140b 0x1410 0x1411 0x1412 0x1413 0x1414 0x1415 0x1416
0x1417 0x1418 0x141c 0x141d 0x141e 0x141f 0x1420 0x1421 0x1422
0x1423 0x1424 0x1425 0x1428 0x1429 0x142a 0x142b 0x142c 0x142d
0x142e 0x142f 0x1430 0x1431 0x1432 0x1435 0x1436 0x1437 0x1438
0x1439 0x143a 0x143b 0x143c 0x143d 0x143e 0x143f 0x1442 0x1443
0x1444 0x1445 0x1446 0x1447 0x1448 0x1449 0x144a 0x144b 0x144f
0x1450 0x1451 0x1452 0x1453 0x1454 0x1455 0x1456 0x1457 0x145c
0x145d 0x145e 0x145f 0x1460 0x1461 0x1462 0x1463 0x1469 0x146a
0x146b 0x146c 0x146d 0x146e 0x146f 0x1476 0x1477 0x1478 0x1479
0x147a 0x147b

Stairs 0x1d4c 0x1db0 0x1db1 0x1db2 0x1db3 0x1db4 0x1db5
0x1db6 0x1db7 0x1db8 0x1db9 0x1dba 0x1dbb 0x1dbc 0x1dbd 0x1dbe
0x1dbf 0x1dc0 0x1dc1 0x1dc2 0x1dc3 0x1dc4 0x1dc5 0x1dc6 0x1dc7
0x1dc8 0x1dc9 0x1dca 0x1dcb 0x1dcc 0x1dcd 0x1dce 0x1dcf 0x1dd0
0x1dd1 0x1dd2 0x1dd3 0x1dd4 0x1dd7
}

Mounts
{
Tiles 0x3ea2 0x3e9f 0x3ea0 0x3ea1 0x3ea6 0x3ea3 0x3ea4
0x3ea5 0x3ea7 0x3ea8 0x3ea9 0x3eb0 0x3eb2 0x3eb3 0x3eb4 0x3eb8
0x3eaa 0x3eab 0x3eac 0x3ead 0x3eba 0x3ebb 0x3ebc 0x3ebd 0x3ebe
0x3eb3 0x3e90 0x3e91 0x3e92 0x3e94
}


can anyone help me to fix this problem?

[Devloper BCL]

prob regled

[westrupp]

i got this problem

[OldnGrey]

For britannia, "uoconvert statics realm=britannia" takes the statics file staidx0.mul and statics0.mul to create those \pol\realm\britannia\statics.dat and statidx.dat.

I assume you are running realmgen.bat from the 096 of 097 distro - which converts all 3 types of files - map, statics, and maptile one after the other.

from the realmgen.bat file the relevent lines are:
SET UOCNVRT_PATH=uoconvert.exe

%UOCNVRT_PATH% map realm=britannia mapid=0 usedif=0 width=6144 height=4096
%UOCNVRT_PATH% statics realm=britannia
%UOCNVRT_PATH% maptile realm=britannia


It's that second last line that doesn't seem to be creating the statics files for you. Do you get any console output when you run the uoconvert on the statics or any messages? Are you running uoconvert 3 times or using realmgen.bat?

I have found realmgen.bat to be almost too easy to use to the point that I hardly have to worry about uoconvert syntax and more. If you haven't got realmgen, take a look at the 096 or 097 distro for the pol\batchfiles directory.